Aspect fire solutions are specialists in the supply, installation and maintenance of Inertsafe300 fire suppression systems.
INERTSAFE300 is a fast clean extinguishing agent. It uses naturally occurring gases, Argon, Nitrogen and Carbon Dioxide. (chemical compound designation IG541) It is approved for use in normally occupied areas and perfectly safe for human exposure at the system design concentrations.
It is stored at 300 BAR pressure as a gas in standard size cylinders. The INERTSAFE300 is discharged through a piping network into the protected area.
INERTSAFE300 extinguishes a fire by reducing the oxygen content of an enclosure from approximately 21% found in ambient air to below 15% at which most combustible materials will not burn. Simultaneously the carbon dioxide in INERTSAFE300 assists the human body in the uptake of oxygen, protecting anyone who may be still within the enclosure at the time of INERTSAFE300 discharge.
INERTSAFE300 is odourless, colourless and leaves no depos-its or decomposition products. It is non- conductive and non – corrosive. The density of INERTSAFE300 is also similar to that of normal air which gives good retention qualities. This means that the room does not need to be sealed as tightly in order to achieve required gas retention levels.
INERTSAFE300 can be utilised to protect multiple areas in a building from a central cylinder bank. This is achieved using pneumatic directional valves, to divert the correct quantity of gas to the area where the activation has occurred, thereby reducing cost and the number of cylinders required.
In order to optimise the performance of any fire suppression system service and maintenance in accordance with the relevant standards is essential. We are able to offer a full 24/7 maintenance and call out facility. In addition we offer in house room integrity testing of protected enclosures.
For further information on any fire suppression systems please contact your local office.
Northern Office: 0845 0540 516 / Southern Office: 0845 0540 518